Contact us

Tama Assist Icon

Homepage JOHN DEERE John Deere Xtranet+

John Deere Xtranet+

Length:

4,500 M MINIMUM GUARANTEE2,800 M MINIMUM GUARANTEE

Perfect Bales. Every Time
Only John Deere Netwrap is designed specifically for your John Deere baler. The new XtraNet+ gives you more bales per roll, better crop protection for longer lasting bales, and a low cost per bale. Strong, long and reliable, XtraNet+ provides you with the perfect baling experience.

John-Deere-XtraNet-Plus-4500m-73459020

Features Benefits

Roll Carry Handles for Safety and Convenience

Designed to increase safety and convenience during transport and handling.

Roll End Warning Stripe

A visible red stripe signals when the roll is running low, giving you a ‘heads up’ on when to replace it, without interruptions.

Zebra ® System

Striped pattern shows which way to load the roll for fast changeovers and the bale unwrap direction when it is time to use the crop.

Guaranteed Minimum Length

Each roll contains the exact stated length — no “plus-or-minus” averages.

Technologies

Edge to Edge® Technology

Keeps the net wide as it feeds onto the bale, covering it completely. This protects your crop and maintains the bale's shape, reducing crop loss and making storage simpler.

Pause

Bale+™ Technology

A unique combination of advanced raw material with a special manufacturing process for: Length: Maximum bale net roll length (50% longer than standard 3000m roll) Weight: Ideal net weight with no compromise on strength Consistency: Uniform consistency for hassle-free operation

Pause

Product Name	Length	Width	Diameter	Rolls per Pallet
John Deere Xtranet+	4,500 M MINIMUM GUARANTEE	1215 MM - 1230 MM	29 CM	16
John Deere Xtranet+	2,800 M MINIMUM GUARANTEE	1215 MM - 1230 MM	24 CM	16

Spec Name

Length

Width

Diameter

Rolls per Pallet

John Deere Xtranet+

John Deere Xtranet+

John Deere Xtranet+

4,500 M MINIMUM GUARANTEE

4,500 M MINIMUM GUARANTEE

2,800 M MINIMUM GUARANTEE

1215 MM - 1230 MM

1215 MM - 1230 MM

1215 MM - 1230 MM

29 CM

29 CM

24 CM

16

16

16

3 Products

More ways we can assist

Service request

Knowledge Center

Training

Field experts

Discover Tama Assist

Questions about Netwrap?

We’ve got the answers

Questions about

Why Netwrap?

Round baling with Netwrap is the most convenient and least expensive way of wrapping your bale. Wrapping with Netwrap reduces costs by being faster than using twine and offers much better protection to the crop than twine ever could.
The main points include:
Less wear and tear on the baler
Fewer revolutions of the bale are needed when net wrapping, dramatically reducing wear and tear on the baler.
Greater speed of operation
Netwrap needs fewer revolutions, reducing the wrapping time and allowing up to 15-20 more bales per hour.
Better coverage on the bale
Net wrapped bales maintain a more uniform shape, making transporting and handling easier, particularly important when wrapping silage bales on an automatic bale wrapper. Bale coverage from edge to edge is also essential when silage wrapping, eliminating air from the bale to ensure better quality forage.
Better weathering capability
Net wrapped bales offer much better weathering capability, allowing outdoor storage and reducing loss from crop wastage.
Easier to remove
Opening a net wrapped bale is a simple and straight-forward operation. The use of net eliminates the difficult and tiresome task of removing baler twine, especially in frosty conditions, and is also less likely to be picked up by livestock or machinery.

Netwrap Baling Tips

When using Round Bale Netwrap, a few moments must be taken to ensure correct preparation of your machine in order to achieve the best results. The most common problems of net splitting, tearing, or fouling on feed rollers arise from the net ‘laddering’, where threads become broken, leading to a running stitch in the net running opposite to the direction of the net, eventually causing the net to separate where the ‘ladder’ has occurred. This can be caused by many different and varying circumstances but will always have the same ‘ladder’ effect.
Check that the area in which the roll sits is free from dirt and debris. Ensure that all metal surfaces the net comes into contact with are free from rust or sharp edges or weld spots (net box sides, spreader bars and rollers etc.), or dried paint ‘lumps’ on any surfaces which could damage the net. Clean up with emery paper if necessary. Also, check that the path for the net to the bale behind the feed mechanism is not dirty or rusty, which could restrict the net’s passage when feeding – often identified by a ‘lump’ of net at the start of the wrapping cycle. This is especially important when starting baling after winter storage.
Ensure the net is threaded correctly. Incorrect feeding of the net will cause incorrect tension being applied, leading to feeding and cutting difficulties which, in turn, will cause problems on subsequent net feed cycles. Where the net is fed through a series of fixed tension bars, always make sure these are clean and polished to avoid excessive friction. Excessive net friction or an uneven surface will cause the net to tear.
Where two rollers are used to feed the net, it is imperative these are correctly aligned and tensioned against one another, to enable the net to feed in evenly and under the correct tension. Incorrectly aligned rollers will produce a corresponding uneven net feed and subsequent cutting action at the end of the wrapping cycle. This will result in poor bale coverage and possible net fouling on the feed rollers at the start of the next cycle. The rollers’ surface should also be closely inspected for abrasions or damage, which could snag the net when feeding.
Ensure the feed rollers are clean of any moisture or residue. Never use an aggressive cleaning agent such as petrol or turpentine to clean rubber rollers.
Always dust rubber rollers down with French chalk or talc powder when loading a new roll of Netwrap, or use anti-static spray to reduce net static when operating. This avoids the net fouling and wrapping around the rollers when feeding in.
Carefully inspect the condition of the belt joiners on variable chamber balers for damage or worn connections, as this will snag the net and cause a tear, which will split the net on the bale.
Make sure the knife or cutting surface is clean and undamaged. Poor cutting action will result in an uneven ‘tail’ to the net, which can become tangled in the rollers and feed mechanism.

How many bales can be made from one roll of Netwrap?

Why does Tama netwrap have colored stripes?

More Farm-Grown Must-Haves

Discover other products of interest

John Deere CoverEdge Netwrap

Maximum protection, minimum effort

Perfectly shaped bales for better transport and storage. CoverEdge unique design covers over the edge of the bale for uniform protection, excellent transport properties and reduction of feed losses.

See product

Broadband XL Netwrap

Ideal Choice for Hay and Silage

Wrap with confidence. Broad Band XL delivers excellent crop coverage, comes UV stabilised for Australian conditions, and fits all balers with options in 1.23m or 1.3m widths. Easy to use and built to last.

See product

TamaTwine+ IMPAX HD Ultimate

Push the Limits of Performance

Built for extreme conditions. Delivers unmatched knot security and high bale density in dry, demanding baling environments.

See product

Big Roll Twine for round bales

Big Roll Twine - Built on Heritage, Trusted for Performance

Trusted round baler twine with high strength and bright pink visibility. UV stabilised and guaranteed minimum length for reliable. efficient baling

See product